Icom ID-880H Instruction Manual - Page 178
bps high speed packet operation
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
13 OTHER FUNCTIONS D 9600 bps high speed packet operation The transceiver supports 2 modes of 9600 bps packet operation: G3RUH and GMSK. q Connect the transceiver and a TNC as illustrated below. TNC side q DATA IN TX AUDIO w GND GND e PTT P r DATA OUT y P SQL RX AUDIO PTT SQL w G3RUH mode can handle 16 kinds of modulated wave forms in order to maintain a communication link. e Set transmit delay on the TNC to 50-100 msec., if available. r Adjust the TNC frequency deviation if necessary (see next page). • When using the PTT P terminal for packet operation, no voice signals are transmitted from the microphone. • When pushing [PTT] during data transmission, data transmission is interrupted and the voice signal takes priority. • Read the instructions supplied with your TNC carefully before attempting packet operation with the transceiver. • Pin r DATA OUT is for 9600 bps operation only. This pin cannot be used for 1200 bps operation. 160