Icom ID-880H Instruction Manual - Page 169
Digital squelch
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
TONE SQUELCH AND POCKET BEEP 12 Digital squelch NOTE: Use digital code squelch when operating with two or more stations, because the digital call sign squelch function recognizes "MY" (your own call sign). Thus the digital call sign squelch function can be used when operating with only one station. q Set the desired operating frequency in the DV mode. w Set the current call signs, "MY" (your own call sign) and "UR" (other station call sign) and/or Digital code. See next page. e Push and hold [TONE](M/CALL) for 1 sec. to enter the tone selection state. r Rotate [DIAL] to activate the digital code or digital call sign squelch, then push [TONE](M/CALL) again. • Digital call sign beep " D SQL," Digital call sign squelch "D SQL," Digital code beep " CSQL" and Digital code squelch "CSQL" appears in order. [DIAL] [TONE] t When the received signal includes a matching call sign/ code, the squelch opens and the signal can be heard. • When the received signal's call sign/code does not match, digital call sign/digital code squelch does not open; however, the S-indicator shows signal strength. • Emits beep tones for 30 sec. and blinks " " if pocket beep is selected in step r. Digital call sign pocket beep Digital code pocket beep Digital call sign squelch Digital code squelch 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 151