Icom ID-880H Instruction Manual - Page 125

D Scan start/stop via the microphone z Push [VFO/LOCK] to select the VFO mode for SCAN full/band/programmed scan; push [MR/CALL] to 2 select the memory mode for memory scan. • Push [FUNC] + [MONI 1(BANK)] then push [Y]/[Z] to select a bank for memory bank scan. Push [CLR A(MW)]. x Push [SCAN 2(T-SCAN)]. c Push [Y]/[Z] to select the desired scanning type. • For full/band/programmed scan "ALL" for full scan; "BAND" for band scan, "P-LINK x (or program scan link name if programmed)" for programmed link scan (x= 0 to 9), "PROGxx (or scan name if programmed)" for programmed scan (xx= 0 to 24; only programmed scan edge numbers are displayed), "DUP" (appears only when duplex operation is set) for duplex scan, "TONE" (appears only when the subaudible tone, tone squelch or DTCS squelch is set) for tone scan. • For memory scan "ALL" for all memory scan; "BAND" for band memory scan, "MODE" for mode scan, "DUP" (appears only when duplex operation is set) for duplex scan, "TONE" (appears only when the subaudible tone, tone squelch or DTCS squelch is set) for tone scan. SCAN OPERATION 8 • For memory bank scan SCAN 2 "ALL" for all bank scan; "B-LINK" for bank link scan or "BANK-x" for bank scan (x= A to Z; programmed bank groups are only displayed.), "DUP" (appears only when duplex operation is set) for duplex scan, "TONE" (appears only when the subaudible tone, tone squelch or DTCS squelch is set) for tone scan. v Push [SCAN 2(T-SCAN)] again to start the scan. b To stop the scan push [SCAN 2(T-SCAN)] or [CLR A(MW)]. • Push [Y]/[Z] also stops the scan. z Push [VFO/LOCK] to select the VFO mode for full YZ scan; push [MR/CALL] to select the memory mode for memory scan. • Push [FUNC] + [MONI 1(BANK)] then push [Y]/[Z] to select a bank for memory bank scan. Push [CLR A(MW)]. x Push and hold [Y]/[Z] to start the scan. c Push [Y]/[Z] to stop the scan. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 107