Icom ID-880H Instruction Manual - Page 56
Duplex direction setting DUP, Frequency offset programming, OFF SET, Storing the repeater list ADD W
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
4 DV MODE PROGRAMMING Duplex direction setting (DUP) This content appears when R1 USE is selected YES. @4 Push [ ](MONI) to enter the duplex direction setting state. • Duplex direction setting screen is displayed. @9 Rotate [DIAL] to select the frequency offset. • The selected number blinks. • Push [ ](LOW) to move the cursor right; push [ ](CS) to move the cursor left. • Push and hold [CLR](DR) for 1 sec. to clear the displayed frequency. @5 Rotate [DIAL] to select the duplex direction. @6 Push [ ](MONI) to set the duplex direction and exit the state. @7 Rotate [DIAL] to select the next content (frequency offset programming). Frequency offset programming (OFF SET) This content appears when R1 USE is selected YES. @8 Push [ ](MONI) to enter the offset frequency program- ming state. • Frequency offset programming screen is displayed. #0 Push [ ](MONI) to set the frequency offset and exit the state. Storing the repeater list (ADD W) #1 Rotate [DIAL] to select the store operation. #2 Push [ ](MONI) to enter storing state. • "ADD W OK?" appears. #3 Push [ ](MONI) again to store the list. 38