Icom ID-880H Instruction Manual - Page 122
Programming scan edges via the microphone
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
8 SCAN OPERATION D Programming scan edges via the microphone z Push [MR/CALL] to select the memory mode. MW x Select scan edge channel, 0A to 24A using [Y]/[Z] or keypad. • Push [ENT C(T-OFF)] then push only 1 or 2 appropri- ate digit key(s), [VOLY 0(TONE-2)] to [SIMP 9(16-KEYL)] then push [VOLZ M(TONE-1)] or [SQLZ #(16KEY-L)] to select scan edge channels. "M" and "#" can be used for "A" and "B" respectively. c Set the desired frequency in the VFO mode. ± Push [VFO/LOCK] to select the VFO mode. ± Set the frequency via the keypad or [Y]/[Z]. v Push [FUNC], then push and hold [CLR A(MW)] for 1 sec. to program. • 3 beeps sound and the VFO is automatically selected. • Memory channel number advances to the next scan edge channel, 0B to 24B when continuing to push [CLR A(MW)] after programming. b To program a frequency for the other scan edge channels, repeat steps z to v. [EXAMPLE]: Programming 145.800 MHz into scan edges 4A. Push Push , then push Push Push Push then for 1 sec. and continue to push 104