Icom ID-880H Instruction Manual - Page 162
Transmitting a DTMF memory directly, Manual transmission
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
11 DTMF MEMORY ENCODER D Transmitting a DTMF memory directly z Push [FUNC] then [LOW 6(DTMF)] to turn the DTMF-S DTMF memory encoder ON. • " " appears in place of 100 MHz digit. x Push [DTMF-S] to turn the DTMF memory di- rect selection ON. • The function indicator (microphone) lights green. c Push the desired DTMF channel. • "0" to "9," "A" to "D," "1" and "#" are available for DTMF memory channels. • The selected DTMF tone sequence is automati- cally transmitted without pushing PTT. NOTE: When no DTMF tone sequence pro- grammed channel number is pushed, it transmits the relative DTMF tone sequence as the manual transmission described as at right. v Push [DTMF-S] again to deactivate the DTMF memory direct selection. b Push [FUNC] then [SET B(D-OFF)] to cancel the DTMF memory encoder. D Manual transmission z Deactivate the DTMF memory encoder by DTMF-S pushing [FUNC] then [SET B(D-OFF)]. x Push [DTMF-S] to turn the DTMF direct selec- tion ON. • The function indicator (microphone) lights green. c Push one of "0" to "9" and "A" to "F" keys mo- mentarily, then push the desired DTMF keys, 0-9 and A to F. • A: [CLR A(MW)] B: [SET B(D-OFF)], C: [ENT C(T-OFF)] D: [SQLY D(MUTE)], E: [VOLZ 1(TONE-1)] F: [SQLZ #(16KEY-L)] • Automatically transmits without pushing PTT. • The first code entered may not be transmitted be- cause transmitting takes 400 msec. to start. Then the DTMF code transmission starts from the 2nd code. v Push [DTMF-S] again to deactivate the DTMF direct selection. 144