Icom ID-880H Instruction Manual - Page 59
Clearing a repeater list
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
DV MODE PROGRAMMING 4 e Rotate [DIAL] to select the desired repeater list to be changed. r Push [ ](MONI) to enter the list. t Rotate [DIAL] to select the content to be changed, then push [ ](MONI) to enter the content and reprogram the content (see pages 35-38 for new repeater list programming details). y After programming is finished, rotate [DIAL] to select "ADD W" or "OVR W," then push [ ](MONI) to store to a new list or overwrite the selected list, respectively. When "ADD W" is selected; • "ADD W OK?" appears. When "OVR W" is selected; • "OVR W OK?" appears. u Push [ ](MONI) again to store the list. Clearing a repeater list 1 Contents of programmed list can be cleared (erased). 2 3 q Enter "EDIT-L" in RPT-L menu. MENU ¶ RPT-L ¶ EDIT-L 4 (Push [MENU ]), (rotate [DIAL], then push [ ](MONI).) 5 • Programmed repeater name appears. 6 w Rotate [DIAL] to select the desired repeater list to be erased. 7 • Push and hold [BAND] for 1 sec. to enter group selection, rotate 8 [DIAL] to select the desired group (0-9) then push [BAND]. e Push [ ](MONI) to enter the list. 9 10 11 r Rotate [DIAL] to select "CLEAR," then push [ ](MONI). 12 • "CLEAR OK?" appears. 13 14 15 t Push [ ](MONI) again to clear the list. 16 17 18 19 41