Icom ID-880H Instruction Manual - Page 153
DRX call sign auto write DRepeater call sign auto write DDV auto detect DCall sign edit record - dstar
View all Icom ID-880H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
MENU SCREEN OPERATION 10 D RX call sign auto write When your own individual station call is received, the calling station call sign can be automatically set in "UR" of the cur- rent call sign. (default: OFF) D Repeater call sign auto write When your own individual station call is received via the D- STAR repeater, the repeater call sign can be set into "RPT1" and/or "RPT2" automatically by reading the repeater's down- link signal. (default: OFF) The transceiver sets the received repeater call sign for operation, over-writing the previously set repeater call sign. 1 D DV auto detect 2 3 When a signal other than the DV mode is received during DV mode operation, the transceiver can automatically select the 4 FM mode. • OFF : Operating mode is fixed in DV. (default) 5 • ON : The transceiver automatically selects the FM 6 mode for temporary operation. 7 8 9 The received audio may be distorted with the auto detection "ON" setting for FM demodulation. 10 11 D Call sign edit record 12 Selects call sign programming when the call sign is edited. • OFF : The edited or corrected call sign overwrites 13 • SEL the pre-programmed channel. A different 14 channel cannot be selected. : The edited or corrected call sign is pro- 15 grammed into the selected call sign memory. 16 • AUTO : The edited or corrected call sign is pro- grammed into a blank channel automatically. 17 (default) 18 19 135