Icom ID-880H Instruction Manual - Page 26

Microphone keypad

Page 26 highlights

1 PANEL DESCRIPTION Microphone keypad KEY FUNCTION SECONDARY FUNCTION ( +key) OTHER FUNCTIONS Switches between opening and closing the In the VFO mode, selects the operating squelch. (p. 20) band. (p. 11) In the memory mode enters bank selection state. (p. 93) After pushing Transmits the DTMF code. : appropriate (pgs. 26, 144) When the DTMF memory en- Starts and stops scanning. (p. 107) Starts and stops tone scanning. (p. 150) coder is activated, push [0] to [9] to transmit the appropriate Starts and stops priority watch. (p. 114) Turns the one-touch PTT function ON or DTMF memory contents. OFF. (p. 21) (p. 144) Selects high output power. (p. 18) Turns the DTCS squelch ON. (p. 146) Selects mid. output power. Selects low output power. Selects minus duplex operation. Selects plus duplex operation. Selects simplex operation. Increases audio output level. (p. 18) Turns the DTCS pocket beep function ON. (p. 146) (p. 18) Turns the DTMF memory encoder function ON. (p. 143) (p. 24) Turns the subaudible tone encoder ON. (p. 25) (p. 24) Turns the CTCSS pocket beep function ON. (p. 146) (p. 24) Turns the tone squelch function ON. (p. 146) (p. 17) Sends a 1750 Hz tone signal while pushing and holding. (p. 26) 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196

8
1
PANEL DESCRIPTION
±
Microphone keypad
KEY
FUNCTION
SECONDARY FUNCTION (
+key)
OTHER FUNCTIONS
Switches between opening and closing the
squelch.
(p. 20)
Starts and stops scanning.
(p. 107)
Starts and stops priority watch.
(p. 114)
Selects high output power.
(p. 18)
Selects mid. output power.
(p. 18)
Selects low output power.
(p. 18)
Selects minus duplex operation.
(p. 24)
Selects plus duplex operation.
(p. 24)
Selects simplex operation.
(p. 24)
Increases audio output level.
(p. 17)
In the VFO mode, selects the operating
band.
(p. 11)
In the memory mode enters bank selection
state.
(p. 93)
Starts and stops tone scanning.
(p. 150)
Turns the one-touch PTT function ON or
OFF.
(p. 21)
Turns the DTCS squelch ON.
(p. 146)
Turns the DTCS pocket beep function ON.
(p. 146)
Turns the DTMF memory encoder function
ON.
(p. 143)
Turns the subaudible tone encoder ON.
(p. 25)
Turns the CTCSS pocket beep function ON.
(p. 146)
Turns the tone squelch function ON.
(p. 146)
Sends a 1750 Hz tone signal while pushing
and holding.
(p. 26)
After pushing
:
Transmits the appropriate
DTMF code.
(pgs. 26, 144)
When the DTMF memory en-
coder is activated, push [0] to
[9] to transmit the appropriate
DTMF memory contents.
(p. 144)