Intel BX80601920 Data Sheet - Page 89
Boxed Processor Specifications
![]() |
UPC - 735858204736
View all Intel BX80601920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Boxed Processor Specifications 8 Boxed Processor Specifications 8.1 Introduction The processor will also be offered as an Intel boxed processor. Intel boxed processors are intended for system integrators who build systems from baseboards and standard components. The boxed processor will be supplied with a cooling solution. This chapter documents baseboard and system requirements for the cooling solution that will be supplied with the boxed processor. This chapter is particularly important for OEMs that manufacture baseboards for system integrators. Note: Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and inches [in brackets]. Figure 8-1 shows a mechanical representation of a boxed processor. Note: Drawings in this section reflect only the specifications on the Intel boxed processor product. These dimensions should not be used as a generic keep-out zone for all cooling solutions. It is the system designers' responsibility to consider their proprietary cooling solution when designing to the required keep-out zone on their system platforms and chassis. Refer to the appropriate processor Thermal and Mechanical Design Guidelines (see Section 1.2) for further guidance. Contact your local Intel Sales Representative for this document. Figure 8-1. Mechanical Representation of the Boxed Processor NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink. Datasheet 89
![](/manual_guide/products/intel-bx80613i7990x-data-sheet-3294831/89.png)