Konica Minolta AccurioPress C14000 UK-301 Auto Inspection User Guide - Page 11

KONICAMINOLTA CONFIDENTIAL 5. USER SETTING Read images to be saved:  The last ref. image before the image error occurred, or the ref. image when an error code is reported during Auto Inspection.  The last ref. image before the image error occurred, or the ref. image when an error code is reported during Auto Inspection, or the ref. image when an error code is reported while the Auto Inspection report is being created.  Analysis results data (CSV file) when the image error was last detected, or the analysis results data when an error code is reported during Auto Inspection, or the analysis results data when an error code is reported during Auto Inspection report is being created. Save log flow when an error occurs during Auto Inspection Error occurs 1. Stop the job using STOP button when an error occurs. Gather logs of main unit UK-301 log+IQ image save Turn the power OFF/ON 2. [Setup Menu/Counter]- [System Info.] Then click [Save Log]. Insert an USB memory in advance if the data should be saved in the USB memory. A dialog "Saving logs. Do not shut down" is displayed. If a popup menu appears after the log is saved, leave the system until the popup disappears.(The popup disappears after the auto-reset time elapses.) 3. Click [UK-301 Log save] +[IQ Image save]. A dialog "Saving logs. Do not shut down" is displayed. Insert an USB memory in advance if the data should be saved in the USB memory. 4の※.[ロTuグr保n 存OH動FDF作/DOのにN実ログ行thをe]保、おp存oよしwびたe[r場UKa合-f3tはe0、r1[tサロhーeグビ保mス存モes動ーsドa作g]-のe[実ロ"グs行a保v]かi存nらg] [USloBg dーisへaのp移peしa替rs USB When the log is saved in the HDD, click [Perform Log Save] on [Service Mode]-[Save Log]. Then click [Export to USB Memory] on [UK-301 Perform Log Save], and save the log in USB memory. .  HDD Setting [HDD Setting]-[UK-301 HDD Batch data format] Perform this action when an error occurs on HDD of UK-301, or after when the HDD of UK-301 is replaced. 7