Konica Minolta AccurioPress C14000 UK-301 Auto Inspection User Guide - Page 6
Konicaminolta Confidential
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
KONICAMINOLTA CONFIDENTIAL 1. SPECIFICATIONS 1. UK-301(Auto Inspection)Specifications Model Model Function Image analysis Report Basic Specification Sheet surface inspection unit Detects the images bellow the criteria (image defects) after analysing the image read by IQ-501. Outputs a report of image analysis. Productivity Image inspection width Scanning resolution Items to be detected as image defects Detectable area Conforms to IQ-501.(150sh/min (A4, 8.5x11)) Max.350mm Main/sub-scan:200dpi Image loss, transfer error, white spots, black spots, stain Area excluding the followings; 1mm or less on the image edge 1mm of the sheet edge Detectable sizenote 1 Min.0.5mm(long axis of approximate ellipse) Error in size detection: ±0.2mm Detectable tone note 1 Density difference from the paper base: 0.4 or more Error in density measurement: ±0.2note 2 Detection level, area Adjustments to be made by users Size, tone difference of the stain Adjustable by individual user Detection area Adjustable by individual user Target prints All prints excluding the followings; Additional prints, full-bleed prints Detection accuracy Successful detection rate of the target within the detection condition set out: 99.5% or higher Even in the case where the defective image cannot be positioned over the normal image, detection may be made as a stain. Also detection may be made for the size/tone out of detection range. Successful detection rate may deteriorate due to the dirt or dust sticking to the reading section of IQ-501.note 3 Pages to be stored:Auto 90,000 or more (A4 image at the compression rate of 30%) Inspection report Pages to be stored: 28,000 pages or more (A4 image) standard image Note 1 Std. condition of size/tone: POD gloss coated 128g/㎡, defined by "Black" on the paper base. Note 2 POD gloss coated 128g/㎡, error in density measurement by reading Bk max. density of Φ0.5mm circle. Note 3 Std. condition:POD gloss coated 128g/㎡, when the sample chart is printed in Bk. 2