Konica Minolta AccurioPress C14000 UK-301 Auto Inspection User Guide - Page 60
Konica Minolta AccurioPress C14000 Manual
View all Konica Minolta AccurioPress C14000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
KONICAMINOLTA CONFIDENTIAL 9. FAQ Q When in the printing process the alignment error will be reported? Alignment error will be reported under the two cases below. 1. When the parameters to align the ref. image to the target image are not available, and thus detection cannot be performed. Possible causes Wrong ref. image was selected. Degree of misalignment between the ref. image and target image is larger than the criterial distance. 2. Differences on the peripheral edge area read on the ref. image vary widely, and thus it misjudged the misalignment as the stain. C-14 Detection A For the ref. image as below, edge area of the object (red frame) is extracted, and compared to its peripheral area (blue frame). Alignment error will be reported if the difference in tone between these two is too large. Ref. Image Target area for alignment error detection Possible causes Degree of misalignment between the ref. image and target image is larger than the criterial distance. Many stains in the periphery of the object edge. Colors are different between the ref. Image and target image. 56