Konica Minolta AccurioPress C14000 UK-301 Auto Inspection User Guide - Page 8

KONICAMINOLTA CONFIDENTIAL 2.OVERVIEW OF AUTOMATIC INSPECTION 2. Overview of Auto Inspection Auto Inspection is a function to detect the images (stain, lack of image, etc.) lower in quality than the defined criteria by comparing all printed sheets with the registered proof image. Detected and rejected sheets are reprinted without being sent to the purge tray, which allows continuing in printing without the risk of upsetting the page order. Results of quality inspection can be checked on the Auto Inspection report (PDF file of the analysis) that is created after completion of the job. Whether the Auto Inspection is made for each job or not can be selected Note: UK-301、VI-513 and RU-702 are required to perform an Auto Inspection. Abnormality detection paper discharge Printing scan pic Proof image registration Collation Normal printing Recovery printing Normal printing Continuous printing RU-702 UK-301 Intelligent Quality Optimizer Quality inspection level setting 7 levels (default) are available to be selected. Auto Inspection target area setting Max. 5 areas can be set as non-inspection target, which is helpful in VDP where some VD areas needs to be excluded. Reporting function Quality inspection report is created after the job is completed irrespective of whether the abnormality is detected or not. A mark is attached to the page on which the abnormality is detected, avoiding to overlook the inspection results.  Product Descriptions video of Auto Inspection System "Intelligent Quality Optimizer IQ-501" can be viewed at; https://www.youtube.com/watch?v=yrtUg7o9Td0 4