Pentax PZ-1p PZ-1p Manual - Page 20
operation.
View all Pentax PZ-1p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
(7) FILM LOADING BASIC OPERATION (PREPARATION) * We suggest that first you operate the camera with no film loaded to become familiar with its operation. * THE SHUTTER CURTAINS ARE FINE-PRECISION MATERIAL. DO NOT TOUCH THEM WITH YOUR FINGERS OR ANY OTHER OBJECT WHILE LOADING FILM. * When DX-coded film is used, the correct film speed is automatically set for the camera. This camera can set a DX-coded film speed within the range ISO 25 to 5000. * If you use a Non-DX coded film, manually set the ISO film speed. See page 106. * Before loading a film for the first time after purchase, open the back cover and remove the protective card as shown in the photo. MAKE SURE NOT TO TOUCH THE SHUTTER CURTAIN. xi 11111111111 2 -3 1 . To open the camera's back cover, slide the back cover release lever in the direction of the arrow. 2. Hold the film cartridge with the protruding end down. Slide the top end in the film chamber first and then push its protruding end in. * Always load or unload a film in the shade or by using your body to shade the camera.