Pentax PZ-1p PZ-1p Manual - Page 61
Noiivind0, 030nva0v
View all Pentax PZ-1p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4 M -ON -USER - OFF 4. Set your desired aperture setting with the Ay direct dial. When the Lens Aperture Ring is at a position other than "A"(auto) 1. Turn the lens aperture ring to a position other than [A]. 2. Set the mode dial to [MODE]. While holding down the mode set button, turn the T5 direct dial until [M] and [ bu ] appear on the LCD panel. 3. When the shutter release button is depressed halfway down, the [ bu ] is displayed in the viewfinder and the approximate aperture is displayed on the LCD panel and in the viewfinder. * When other than an F lens or FA lens is in use, no approximate aperture will appear. * By depressing the preview button, you can close the lens down to the aperture you have set, allowing you to check the depth of field in the viewfinder. * When using this mode, use a steady tripod and attach the optional "Cable Switch F" after detaching the Release socket cap F0. NOIIVInd0 030NVA0V