Pentax PZ-1p PZ-1p Manual - Page 64
Nollvii3do, Cg0nvaciv
View all Pentax PZ-1p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
MED 2 3 ni:2 cit NOLLVII3dO CG0NVACIV oti USER OFF [ When the Lens Aperture Ring is set a Position Other than A. 1. Turn the lens aperture ring to the desired f-stop other than A position. 2. Set the mode dial to [ mode . While holding down the mode set button, turn the T direct dial until the M and the 250_ appear on the LCD panel. 3. When the shutter release button is depressed halfway down,the I Bar Graph and the approximate aperture setting are displayed on the LCD panel and in the viewfinder. * When a lens othe than an F or FA is in use, no approximate aperture indication will appear on the LCD panel nor in the viewfinder. * Moving the dot to the center by the lens aperture ring indicates that the proper exposure will be obtained. Turn the lens aperture ring to obtain your desired exposure value. * The bar graph indication and the warning the are same as when the lens aperture ring is set the A position. See page 59. * By depressing the preview button, you can close down to the aperture you have set, allowing you to check the depth of field in the viewfinder. When the exposure is set with the preview button depressed, the exposure will not be set correctly.