Pentax PZ-1p PZ-1p Manual - Page 95
&RV
View all Pentax PZ-1p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Al% _ON o - USER - OFF (ao}!&:QR"V o Trailing-Shutter-Curtain Sync Flash with the Built-In Flash In the trailing-shutter-curtain sync flash, the flash discharges the instant the second curtain begins its travel. In normal electronic flash photography, the flash discharges at the instant the first curtain completes it travel. This mode will freeze the subject with a blur appearing before the subject under a slow shutter condi- tion. How to Set Set the mode dial to the [ '* ]. While holding down the mode set button, turn the Ty direct dial until the [ ] appears. * The trailing-shutter-curtain flash function does not work when the camera's Main Switch is set at the [USER] position. However, by selecting the USER- SET FUNCTION in the USER position, it can be used. * When only dedicated flash is in use, the leading- shutter-curtain sync flash mode does not operates even if [ ] is displayed on the LCD panel. * When combining the Built-in-flash (camera side) along with the trailing-shutter-curtain sync flash mode with the a Pentax dedicated flash unit with the leading-curtain synch flash mode (normal mode), when both flashes are discharged at the same time, the Pentax dedicated flash automatically switches to the trailing-shutter-curtain sync flash. * If a dedicated flash which is not equipped with the trailing-curtain-sync mode is discharged together with the built-in flash with the trailing-shutter-curtain sync flash mode, both flash units discharge in the leading-curtain sync flash mode. * To cancel the trailing-curtain-sync flash mode, the same procedure is required as when it was set to re- move [ ] from the LCD panel. * The fastest flash-sync shutter speed is 1/125 sec. when the built-in flash is in use with the trailing- curtain-sync flash mode. NOILVEI3dO COONVACIV