Pentax PZ-1p PZ-1p Manual - Page 87

83 4 771 0 4. While the shutter release button is depressed half way down, the lens automatically zooms to maintain the same image size. When the camera stops zooming, depress the shutter release button fully down. * Releasing the shutter before completion of zooming operation may not yield a preset image size: to get the desired image size, release the shutter only after the lens finishes zooming. * The image size stored in memory is not cleared even if the camera's main switch is set to [OFF]. * If the lens is removed or replaced while the camera's main switch is set at [ON] or [USER], the stored image size will be cleared from memory. To prevent this, set the camera's main switch to [OFF] before removing the lens. * Setting the lens focal length to the middle of its range for the desired image size will provide the most versatility. For instance, set the 28-80mm lens to around 50mm. * When the battery is removed, keep in mind that a preset image size is cleared. * Shooting the fast moving subject, the image size may not come out the same. * If the camera-to-subject distance is too close or far, the preset image size may not be obtained as this 0zz mode works effectively only within the constraints of m the focal length range. In addition, since the preset 0 image size works only on the lens currently in use, m the preset image size may not be obtained if the lens is replaced with another.