Ricoh PJ WX4152N Operating Instructions - Page 116
Wall Color Mode, 3D Projection > 3D Projection, 3D Projection > L/R Reverse, Side by Side
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
7. Changing the Projector Settings Item Default Wall Color Mode Off Select the image hue according to the projection surface when the image is being projected on something other than a screen. • Off • Whiteboard • Beige • Gray • Blackboard (Green) 3D Projection > 3D Projection Off Specify whether or not to use 3D projection. The image will be slightly darker if this is set to [On]. 3D projection and interactive mode cannot be enabled simultaneously. If you change this setting to [On], [Interactive Mode] in [Default Settings 1] is switched to [Off]. 3D Projection > L/R Reverse Specify whether or not to reverse left and right in a 3D image. • Normal • Reverse Normal 3D Projection > 3D Format Auto Select a 3D format. Select [Auto] when the 3D signals are input through HDMI. If the image does not project in 3D even if [Auto] is selected, change the setting to match the 3D format of the signal being input. • Auto • Frame Sequential • Side by Side • Top and Bottom • Frame Packing 114