Ricoh PJ WX4152N Operating Instructions - Page 40
Turning Off the Projector, details, see Energy Saving Settings Menu.
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Projecting an Image • Depending on the computer, the image may not be projected properly if it is displayed on the computer's LCD display while being projected onto the screen by the projector. If this happens, turn off the computer's LCD display. For details about switching the display, see the manual provided with the computer. Turning Off the Projector • Unplug the power cord if the projector will not be used for an extended period of time. • After disconnecting the power cord, wait at least 1 second before connecting the power cord again. Not doing so may result in a malfunction. 1. Press the [Power] button. The confirm screen appears. 2. Press the [Power] button. The projector beeps and enters the standby mode. 3. Disconnect the power cord. • After turning the lamp off, wait about five minutes for the lamp to cool before turning the lamp on again. The lamp may not light if it is very hot. • The projector turns off as soon as the power cord is disconnected (direct power off). • You can specify the settings for saving energy in standby mode in [Energy Saving Settings]. For details, see page 116 "Energy Saving Settings Menu". 38
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/40.png)