Ricoh PJ WX4152N Operating Instructions - Page 14
V, 3.7 A or more, 60Hz, 240 V, 50/60Hz
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. Preparations for Using the Projector • Push the power plug all the way into the power outlet. Do not use a power outlet with a loose connection. Doing so may result in heat buildup. Plug the power cord in the correct direction into the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock. • When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock. • Do not block the projection light when it is on. If you do so, the part that is blocking the projection light may get quite hot and deform, deteriorate or cause a burn or fire. The reflected light may make the projection window hot and cause a machine failure. To temporarily suspend projection, select the AV mute function. To suspend longer, turn off the machine. • Do not increase the volume unless you are listening while increasing the volume. Also, lower the volume before turning off the power, because a loud sound may be emitted when the power is turned on and cause hearing damage. • Do not tilt the machine horizontally more than ±20 degrees. Doing so may cause the entrance of foreign objects in the housing of the machine which could result in fire or electric shock. • Power Source • (mainly Europe and Asia) 220-240 V, 1.7 A or more, 50/60Hz • (mainly North America) 120 V, 3.7 A or more, 60Hz Please be sure to connect the power cord to a power source as above. 12
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/14.png)