Ricoh PJ WX4152N Operating Instructions - Page 32
Connecting Equipment to the Projector, Connecting a Computer, Connecting to the RGB out port,
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
1. Preparations for Using the Projector Connecting Equipment to the Projector • Do not place the power cord and connection cable in a way that might cause someone to trip and fall. The machine might fall over and cause an injury. Various equipments can be connected to the projector. Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for the applicable equipment before connecting it to the projector. Connecting a Computer • Some computers cannot be connected to the projector. Before connecting a computer to the projector, check the output terminals and signal compatibility. Connecting to the RGB out port Connect an RGB cable to the Computer In port of the projector and to the RGB out port of a computer. To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the projector and to the audio out port of a computer. DPE005 • Use the RGB cable provided with the projector. Connecting to the HDMI port Connect an HDMI cable to the HDMI ports of the projector and the computer. 30 CZE112
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/32.png)