Ricoh PJ WX4152N Operating Instructions - Page 129
Communication Mode, Channel, TCP/IP Settings, IP Address, Subnet Mask, Adhoc, Enable
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Network Settings Menu Item Default Communication Mode Select the wireless LAN communication mode. • Infrastructure Select this mode when you want to connect the projector to a wireless LAN network. You need to specify [SSID] and items in [Security] and [TCP/IP Settings] in this mode. • Adhoc Select this mode when you want to connect the projector and the computer directly. The projector specifies [SSID] and items in [Security] and [TCP/IP Settings] automatically in this mode. Adhoc SSID Enter the SSID to connect to a wireless LAN network when [Infrastructure] is selected. Enter up to 32 characters. (blank) Channel 11 Select the channel to use when [Adhoc] is selected. Select the channel that matches the type of wireless LAN being used. The channels available might differ depending on the country. • 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 TCP/IP Settings Item Default DHCP Specify whether to enable or disable DHCP. The IP address is allocated automatically from the DHCP server when [Enable] is selected. If you select [Disable], manually enter the IP address, subnet mask, and default gateway. Enable IP Address Enter the projector's IP address. 0.0.0.0 Subnet Mask Enter the subnet mask. 0.0.0.0 127
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/129.png)