Ricoh PJ WX4152N Operating Instructions - Page 34
Connecting AV Equipment, Connecting to the HDMI port
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
1. Preparations for Using the Projector Connecting AV Equipment Use a cable that supports the signal being input when connecting AV equipment. Connecting to the HDMI port Connect an HDMI cable to the HDMI ports of the projector and the AV equipment. CZE116 • Some devices may not operate properly when connected using HDMI. • Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed HDMI cable. A conventional HDMI cable may not work properly. Connecting to the video out port Connect a video cable to the Video In port of the projector and to the video out port of AV equipment. To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the projector and to the audio out port of AV equipment. CZE117 Connecting to the Y/Pb/Pr out port Connect a D-sub to component video cable to the Computer In port of the projector and to the Y/Pb/Pr out port of the AV equipment. To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the projector and to the audio out port of AV equipment. 32 CZE118
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/34.png)