Ricoh PJ WX4152N Operating Instructions - Page 33
Connecting to the DVI out port, Connecting via a network using a wired LAN
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Connecting Equipment to the Projector Connecting to the DVI out port To input a DVI signal to the projector, connect a DVI-to-HDMI cable to the HDMI port of the projector and to the DVI out port of a computer. To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the projector and to the audio out port of a computer. CZE113 • You can use a DVI-to-HDMI conversion adapter instead of a DVI-to-HDMI cable. Connecting via a network using a wired LAN Connect an Ethernet cable to the LAN port of the projector and to a network device such as a hub. For details about how to connect an Ethernet cable, see page 63 "Connecting an Ethernet Cable". To use the projector via a network, you must specify settings such as the IP address. For details, see page 66 "Connecting the Projector to a Network". CZE114 • Use an Ethernet cable that is shielded. Connecting via a network using a wireless LAN The projector is equipped with a wireless connectivity function. Before using a wireless LAN, see page 64 "Precautions for Using a Wireless LAN". To use the projector via a network, you must specify settings such as the IP address. For details, see page 66 "Connecting the Projector to a Network". CZE115 31