Ricoh PJ WX4152N Operating Instructions - Page 43
Reducing the Size of the Projected Image, Adjust the keystone distortion using the, buttons.
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
2. Adjust the keystone distortion using the [ ] and [ ] buttons. Adjusting the Projected Image CUD004 Press the [ ] button to decrease the width of the bottom of the projected image. Press the [ ] button to decrease the width of the top of the projected image. • Some data may be lost or the image quality may be degraded depending on the degree of the keystone adjustment and the type of the image. • You can manually adjust for keystone distortion even if [Auto Keystone] is specified as [On]. However, if you change the angle of the projector, it is automatically adjusted again. • The keystone adjustment level stays registered even if the projector is turned off. We recommend that you specify [Auto Keystone] to [Off] if the projector and screen are permanently installed. • You can also adjust the keystone distortion using the [ ] and [ ] buttons on the control panel. Reducing the Size of the Projected Image If the projected image is larger than the screen, reduce the size of the image using the [Zoom] button. The image can be reduced by 80 to 100% using the digital zoom function. 1. Press the [Zoom] button. The value bar appears at the bottom of the screen. 2. Adjust the size of the projected image using the [ ] and [ ] buttons. CUD046 Press the [ ] button to reduce the size of the projected image. Press the [ ] button to enlarge the size of the projected image. The image is enlarged until it reaches the original size. 41
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/43.png)