Ricoh PJ WX4152N Operating Instructions - Page 53
Controlling the Projected Image, Disconnecting the USB Device
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
How to Project Images from USB Memory Device Controlling the Projected Image Use the remote control to control a projected still image or video. How to control a still image • [Enter] button: Starts the slide show from the projected image. Stops the slide show that is in progress. • [ ] button: Displays the next image. • [ ] button: Displays the previous image. • [ ] button: Rotates the image 90° to the right. • [ ] button: Rotates the image 90° to the left. • [Menu] button: Returns to the [USB File Projection] screen. How to control a video • [Enter] button: Pauses or restarts the video. • [ ] button: Fast forwards the video. If a video is paused, displays the next image. • [ ] button: Rewinds the video. If a video is paused, displays the previous image. • [ ] button: Increases the volume. • [ ] button: Decreases the volume. • [Menu] button: Returns to the [USB File Projection] screen. • You can also control the projected videos from the control panel on the projector. • The rewind and fast forward speed increases three levels each time the button is pressed. To reduce the speed to its original, press the [Enter] button. • If any operation except for volume adjustment is performed during the slide show, the slide show stops. Disconnecting the USB Device 1. Press the [Menu] button if an image is projected. The [USB File Projection] screen is displayed. 2. Select [Remove USB Mem.] on the [USB File Projection] screen, and then press the [Enter] button. The confirmation screen is displayed. 3. Select [OK], and then press the [Enter] button. 4. Disconnect the USB device. 51
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/53.png)