Ricoh PJ WX4152N Operating Instructions - Page 120
Default Settings 1 Menu
![]() |
View all Ricoh PJ WX4152N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
7. Changing the Projector Settings Default Settings 1 Menu Item Default Auto Input Search On Specify whether or not to switch to another input signal that the projector detects when you press the [Input] button. Beep On Specify whether or not to beep during use. Background on No Signal Logo Select the image display when there is no input signal. • Logo • Blue • None Display Guidance On Specify whether or not to display the guidance for operating the projector. Start-up Screen On Specify whether or not to display the start-up screen when the projector is turned on. User Logo > Register Logo - Register a user logo. Project the image to be registered as a user logo, and then execute this function. User logos can be displayed in the start-up screen or as the background when there are no input signals. You can register an image with a resolution of up to 1280 × 800 pixels. This function is available when you select [Computer], or [HDMI] (RGB signals) as the input signal. When you select [Network PC] or [Miracast] as the input signal, this function is available for the computer or smart device screen you project. User Logo > Confirm Logo - Display the registered user logo. User Logo > Reset Logo - Delete the registered user logo. 118
![](/manual_guide/products/ricoh-pj-wx4152ni-operating-instructions-83d4979/120.png)