Samsung SF-565PR User Manual (user Manual) (ver.3.00) (English) - Page 204

Size (mm/in.) Weight Capacity* Labels Letter (215.9 x 279/8.5 x 11) A4 (210 x 297/8.27 x 11.69) 120 to 150 g/m2 Transparency films Letter (215.9 x 279/8.5 x 11) A4 (210 x 297/8.27 x 11.69) Card stocks A6 card (105 x 148/4.13 x 5.88) Post Card (101.6 x 152.4/4 x 6) Hagaki (100 x 148/3.94 x 5.83) 138 to 146 g/m2 90 to 163 g/m2 1 sheet of paper for the manual feeder Minimum size (custom) Maximum size (Legal) 60 to 120 g/m2 bond (16 to 32 lb) * Capacity may vary depending on print materials' weight and thickness, and environmental conditions. NOTE: You may experience jams when using print materials with a length of less than 127 mm (5 in.). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to "Paper Storage Environment" on page A.9. Guidelines for Using Paper For the best result, use conventional 75 g/m2 (20 lb) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges. If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package. The following problems may cause print quality deviations, jamming or even damage to the machine: Symptom Poor print quality or toner adhesion, problems with feeding Dropout, jamming, curl Problem with Paper Too moist, too rough, too smooth or embossed; faulty paper lot Stored improperly Increased gray background Too heavy shading/machine wear Excessive curl problems with Too moist, wrong grain feeding direction or short-grain construction Solution Try another kind of paper, between 100 ~ 400 Sheffied, 4 ~ 5 % moisture content. Store paper flat in its moistureproof wrapping. Use lighter paper, use the rear output slot. • Use the rear output slot. • Use long-grain paper. A.7 A