Samsung SF-565PR User Manual (user Manual) (ver.3.00) (English) - Page 205
Paper Specifications, Paper Output Capacity, Category, Symptom, Problem with Paper, Solution
UPC - 635753610277
View all Samsung SF-565PR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Symptom Jamming, damage to machine Problems with feeding Problem with Paper Cutouts or perforations Ragged edges Solution Do not use paper with cutouts or perforations. Use good quality paper. NOTES: • Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography. • Do not use raised or embossed letterhead. • The machine uses heat and pressure to fuse toner to the paper. Insure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second). Paper Specifications Category Acid Content Caliper Curl in Ream Cut Edge Conditions Fusing Compatibility Grain Moisture Content Smoothness Specifications 5.5 pH or lower 0.094 ~ 0.18 mm (3.0 ~ 7.0 mils) Flat within 5 mm (0.02 in.) Cut with sharp blades with no visible fray. Must not scorch, melt, offset or release hazardous emissions when heated to 200 °C (392 °F) for 0.1 second. Long Grain 4 % ~ 6 % by weight 100 ~ 400 Sheffied Paper Output Capacity Output Location Face-down output tray Face-up output slot Capacity 150 sheets of 75 g/m2 bond (20 lb) paper 1 sheet of 75 g/m2 bond (20 lb) paper A.8