Sharp MX-M232D Operation Guide - Page 96
B. Misfeed in the fusing area
View all Sharp MX-M232D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
TROUBLESHOOTING B. Misfeed in the fusing area 1 Push gently on both ends of the front cover and open it. 4 Lift the fusing unit release levers, to return them to their operating positions. 2 Turn the roller rotating knob in the direction of the arrow. Roller rotating knob 5 Close the front cover and side cover. The message " Clear paper path." will be cleared and copying will be possible. 3 Carefully remove the misfed paper. Lower the fusing unit release levers to allow easier removal. Fusing unit release lever Be careful not to tear the misfed paper during removal. The fusing unit is hot. Do not touch Warning the fusing unit when removing misfed paper. Doing so may cause a burn or injury. Caution • Do not touch the photoconductive drum (green portion) when removing the misfed paper. Doing so may damage the drum and cause smudges on copies. • Be careful about unfixed toner on the misfed paper not to soil your hands or clothes. Note • When closing the front cover, gently hold both ends. • When closing the side cover, press on the handle. • If the message does not clear, check again to make sure that no pieces of paper remain. 95 Downloaded from www.Manualslib.com manuals search engine