Sharp MX-M232D Operation Guide - Page 97
C. Misfeed in the transport area
View all Sharp MX-M232D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
C. Misfeed in the transport area 1 Open the fusing paper guide by pressing down the green-labeled projection on the guide and remove the misfed paper. Be careful not to tear the misfed paper during removal. The fusing unit is hot. Do not touch Warning the fusing unit when removing misfed paper. Doing so may cause a burn or injury. 2 If the misfed paper cannot be removed by the previous step but is visible in the paper output area, remove the paper by pulling it into the paper output area. Be careful not to tear the misfed paper during removal. 3 Close the side cover. The message " Clear paper path." will be cleared and copying will be possible. Note • When closing the side cover, press on the handle. • If the paper was torn, make sure that no torn pieces remain in the machine. • If the message does not clear, check again to make sure that no pieces of paper remain. Downloaded from www.Manualslib.com manuals search engine TROUBLESHOOTING 6 96