Sharp MX-M232D Operation Guide - Page 99
Misfeed In The Lower Paper Tray
View all Sharp MX-M232D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
TROUBLESHOOTING MISFEED IN THE LOWER PAPER TRAY Note • Make sure that there is no misfed paper in the tray before pulling it out. (p.94) • Use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit/2 x 250-sheet paper feed unit. 1 Open the lower side cover. Grasp the handle to open the lower side cover. 5 Close the lower paper tray. 2 Remove the misfed paper. Be careful not to tear the misfed paper during removal. 3 If the misfed paper is not seen in step 2, lift and pull out the lower paper tray and remove the misfed paper. Be careful not to tear the misfed paper during removal. 4 Close the lower side cover. The message " Clear paper path." will be cleared and copying will be possible. Note If the message does not clear, check again to make sure that no pieces of paper remain. Downloaded from www.Manualslib.com manuals search engine 6 98