Sony DCR PC105 Operating Instructions - Page 126

Recording an image from a tape as a still image Your camcorder can record moving picture data as a still image on a "Memory Stick." Image size is automatically set to 640 × 480. Before operation Insert the "Memory Stick" and the recorded tape into your camcorder. The POWER switch should be set to . Operate by touching the panel. (1) Press . The picture recorded on the tape is played back. (2) Keep pressing PHOTO lightly and check the image. The picture from the tape freezes and the CAPTURE indicator appears on the screen. Recording does not start yet. To change the still image, release PHOTO, select a still image again, and then press and hold PHOTO lightly. (3) Press PHOTO deeper. Recording is complete when the bar scroll indicator disappears. The image displayed on the screen when you pressed PHOTO deeper will be recorded on the "Memory Stick." 1 2 50min 640 FINE 12 CAPTURE 3 101 50min 640 FINE 101 126 Sound recorded on the tape You cannot record audio from the tape. Title You cannot record the titles. Recording date/time The date/time when it is recorded on the "Memory Stick" is recorded. Various settings are not recorded. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button.