Sony DCR PC105 Operating Instructions - Page 31
Recording a picture, After recording, Adjusting the LCD screen
UPC - 027242629172
View all Sony DCR PC105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Recording - Basics Recording a picture Remaining battery time indicator during recording The remaining battery time indicator roughly indicates the continuous recording time. The indicator may not be correct, depending on the conditions in which you are recording. When you close the LCD panel and open it again, it takes about 1 minute for the correct remaining battery time in minutes to be displayed. Time code The time code indicates the recording or playback time, "0:00:00" (hours : minutes : seconds) during recording and "0:00:00:00" (hours : minutes : seconds : frames) during playback. You cannot rewrite only the time code later. Recording data The recording data (date/time or various settings when recorded) are not displayed during recording. However, they are recorded automatically on the tape. To display the recording data, press DATA CODE during playback (p. 44). After recording (1) Set the POWER switch to OFF (CHG). (2) Close the LCD panel. (3) Eject the cassette. (4) Remove the power source. Adjusting the LCD screen When you adjust the LCD panel, make sure that the LCD panel is opened up to 90 degrees. 180° 90° 90° Note When using the LCD screen except in the mirror mode, the viewfinder automatically turns off. 31