Sony DCR PC105 Operating Instructions - Page 50

Recording still images on a "Memory Stick" during tape recording standby or tape recording During tape recording The POWER switch should be set to . Press PHOTO deeper. The image displayed on the screen when you pressed PHOTO deeper will be recorded on the "Memory Stick." Recording on the "Memory Stick" is complete when the bar scroll indicator disappears. Note You cannot record still images on a "Memory Stick" while using the following functions (The indicator flashes): - End search - Wide mode - While fading in with BOUNCE - MEMORY MIX "Memory Stick" See page 112 for details. Still images •The image size will be 640 × 480. •If the POWER switch is set to CAMERA, image quality cannot be changed. Images will be recorded with image quality as set when the POWER switch is set to MEMORY. (The default setting is FINE.) To record images with higher image quality, use of memory photo recording is recommended (p. 120). Recording with the flash During recording standby, you can record still images on the "Memory Stick" with the flash. See page 124 for details. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. To record still images on the "Memory Stick" during tape recording You cannot check an image on the screen by pressing PHOTO lightly. During and after recording still images on the "Memory Stick" Your camcorder continues recording on the tape. Title You cannot record titles. Self-timer recording During recording standby, you can record still images on the "Memory Stick" with the self-timer. See page 52 for details. 50