Sony DCR PC105 Operating Instructions - Page 217

Additional Information About the "InfoLITHIUM" battery pack Remaining battery time indicator •If the power goes off although the remaining battery time indicator indicates that the battery pack has enough power to operate, charge the battery pack fully again so that the indication on the remaining battery time indicator is correct. Note, however, that the correct battery indication sometimes will not be restored if it is used in high temperatures for a long time or left in a fully charged state, or the battery pack is frequently used. Regard the remaining battery time indication as the approximate shooting time. •The E mark indicating little remaining battery time sometimes flashes depending on the operating conditions or ambient temperature and environment even if the remaining battery time is about 5 to 10 minutes. How to store the battery pack •If the battery pack is not used for a long time, do the following once a year to maintain proper function. 1. Fully charge the battery pack. 2. Discharge on your electronic equipment. 3. Remove the battery pack from the equipment and store it in a dry, cool place. •To use the battery pack up on your camcorder, leave your camcorder in tape recording standby until the power goes off without a cassette inserted. Battery life •The battery life is limited. Battery capacity drops little by little as you use it more and more, and as time passes. When the available battery time is shortened considerably, a probable cause is that the battery pack has reached the end of its life. Please buy a new battery pack. •The battery life varies depending on how it is stored, operating conditions, and the environment for each battery pack. Disposal of the battery pack Certain countries or regions may regulate diposal of the battery pack used to power this product. Please consult with your local authority. "InfoLITHIUM" is a trademark of Sony Corporation. 217