Sony DCR PC105 Operating Instructions - Page 21

Step 2 Adjusting the grip belt

Page 21 highlights

Getting Started Step 2 Adjusting the grip belt The grip belt supplied with your camcorder can be used as an ordinary grip belt or a wrist strap. Using as a grip belt Put your hand through the grip belt. Fasten the grip belt firmly. If the grip belt hangs out too far, tuck it in the hand pad. 12 4 3 Using the grip belt as a wrist strap Finger rest Commercially available straps, etc., can be attached to this ring. (1) Open the hand pad. Unfasten the belt from the clasp and pull out the belt from the hand pad. (2) Pull out the belt from the strap ring and feed the belt through the clasp again. (3) Feed the belt through the belt adjuster and close the hand pad. Notes •Hold the camcorder, putting your wrist through the belt and your fingers lightly on the finger rest. •The hand pad can be removed from the belt. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240

21
Getting Started
Step 2 Adjusting the grip belt
The grip belt supplied with your camcorder can be used as an ordinary grip belt or a
wrist strap.
Using as a grip belt
Put your hand through the grip belt.
Fasten the grip belt firmly.
If the grip belt hangs out too far, tuck it in the hand pad.
Using the grip belt as a wrist strap
(
1
)
Open the hand pad. Unfasten the belt from the clasp and pull out the belt from
the hand pad.
(
2
)
Pull out the belt from the strap ring and feed the belt through the clasp again.
(
3
)
Feed the belt through the belt adjuster and close the hand pad.
Notes
Hold the camcorder, putting your wrist through the belt and your fingers lightly on
the finger rest.
The hand pad can be removed from the belt.
Finger rest
2
1
3
4
Commercially available straps, etc.,
can be attached to this ring.