Sony DCR PC105 Operating Instructions - Page 44
To display date/time and various settings, Various settings
UPC - 027242629172
View all Sony DCR PC105 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Playing back a tape To display date/time and various settings Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code). Follow the steps below to display the data code using the touch panel . (1) Set the POWER switch to VCR, then play back the tape. (2) During playback, press FN and select PAGE2 (p. 25). (3) Press DATA CODE. (4) Select CAM DATA or DATE DATA, then press OK. (5) Press EXIT. Date/time 50min 0:00:23:01 JUL 4 2003 12:05:56 PM Various settings 50min 0:00:23:01 [a] [b] [c] AUTO [d] 6 0 AWB F1.8 9 dB [e] [f] [g] [a] Time code [b] SteadyShot off [c] Exposure [d] White balance [e] Gain [f] Shutter speed [g] Aperture value To not display date/time or the various data Select OFF in step 4. Various settings Various settings show your camcorder's recording information at the time of recording. During tape recording, the various settings will not be displayed. When you use data code, bars (-- -- --) appear if: - A blank portion of the tape is being played back. - The tape is unreadable due to tape damage or noise. - The tape was recorded by a camcorder without the date and time set. Data code When you connect your camcorder to a TV, the data code also appears on the TV screen. When the POWER switch is set to OFF (CHG) The BATTERY INFO indicator will not appear, even if you press DISPLAY on the Remote Commander. 44