Home » Sony Manuals » Video Cameras » Sony DCR PC105 » Manual Viewer

Sony DCR PC105 Operating Instructions - Page 225

Camcorder care, AC Adaptor, About care and storage of the lens

UPC - 027242629172

Add to My Manuals
Save this manual to your list of manuals

Page 225 highlights

Additional Information Maintenance information and precautions Camcorder care •Eject the tape, periodically turn on the power, operate the CAMERA and VCR sections and play back the tape for about 3 minutes if your camcorder is not to be used for a long time. •Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens, remove them with a soft cloth. •Clean your camcorder body with a dry soft cloth, or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent which may damage the finish. •Do not let sand get into your camcorder. When you use your camcorder on a sandy beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause your camcorder to malfunction, and sometimes this malfunction cannot be repaired. AC Adaptor •Unplug the unit from a wall outlet when you are not using the unit for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. •Do not operate the unit with a damaged cord or if the unit has been dropped or damaged. •Do not bend the power cord forcibly, or place a heavy object on it. This may damage the cord and cause fire or electrical shock. •Prevent metallic objects from coming into contact with the metal parts of the connecting section. If this happens, a short may occur and the unit may be damaged. •Always keep metal contacts clean. •Do not disassemble the unit. •Do not apply mechanical shock or drop the unit. •While the unit is in use, particularly during charging, keep it away from AM receivers and video equipment. AM receivers and video equipment disturb AM reception and video operation. •The unit becomes warm during use. This is not a malfunction. •Do not place the unit in locations that are: - Extremely hot or cold - Dusty or dirty - Very humid - Vibrating About care and storage of the lens •Wipe the surface of the lens clean with a soft cloth in the following instance: - When there are fingerprints on the lens surface - In hot or humid locations - When the lens is used in environments such as the seaside •Store the lens in a well-ventilated location subject to little dirt or dust. To prevent mold from occurring, periodically perform the above. We recommend turning on and operating your camcorder about once per month to keep your camcorder in an optimum state for a long time. 225

Section	Page
Main Features	4
Table of Contents	6
Quick Start Guide	8
– Recording on tape	8
– Recording on a “Memory Stick”	10
Getting Started	12
Using this manual	12
Checking the supplied accessories	14
Step 1 Preparing the power source	15
Installing the battery pack	15
Charging the battery pack	16
Checking status of the battery pack – Battery Info	19
Using your camcorder on house current	20
Step 2 Adjusting the grip belt	21
Step 3 Setting the date and time	23
Step 4 Using the touch panel	25
Recording – Basics	28
Recording a picture	28
Shooting backlit subjects – Back light function	36
Shooting in the dark – NightShot/Super NightShot/Color Slow Shutter	37
Checking recordings – End search/Edit search/Rec Review	40
Playback – Basics	42
Playing back a tape	42
To display the screen indicators – Display function	43
Viewing a recording on TV	47
Advanced Recording Operations	49
Recording still images on a “Memory Stick” during tape recording standby or tape recording	49
Self-timer recording	51
Adjusting the white balance manually	53
Using the wide mode	55
Using the fader function	57
Using special effects – Picture effect	60
Using special effects – Digital effect	61
Using PROGRAM AE	64
Adjusting the exposure manually	66
Using spot light-metering function – Flexible Spot Meter	67
Focusing manually	68
Using spot focus function – Spot Focus	70
Interval Recording	71
Frame by frame recording – Frame recording	73
Using the viewfinder	74
Advanced Playback Operations	76
Playing back a tape with picture effect	76
Playing back a tape with digital effect	77
Enlarging images recorded on tape – Tape PB ZOOM	78
Quickly locating a scene – Zero set memory	80
Searching for a recording by title – Title search	81
Searching for a recording by date – Date search	82
Editing	84
Dubbing a tape	84
Dubbing only desired scenes – Digital program editing (on tape)	87
Recording video or TV programs	97
Inserting a scene from a VCR – Insert editing	100
Audio dubbing	102
Superimposing a title on a cassette with Cassette Memory	106
Making your own titles	109
Labeling a cassette with Cassette Memory	110
Erasing all the data in Cassette Memory	111
“Memory Stick” Operations	112
Using a “Memory Stick” – Introduction	112
Selecting image quality and size	116
Recording a still image on a “Memory Stick”– Memory photo recording	120
Recording an image from a tape as a still image	126
Superimposing a still image in a “Memory Stick” on an image – MEMORY MIX	128
Interval Photo Recording	132
Recording a moving picture on a “Memory Stick” – MPEG MOVIE recording	133
Self-timer recording	135
Recording a picture from a tape as a moving picture	137
Recording edited pictures from a tape as a moving picture – Digital program editing (on a “Memory Stick”)	139
Changing the recording folder	142
Viewing a still image – Memory photo playback	144
Viewing a moving picture – MPEG MOVIE playback	147
Choosing a playback folder	150
Enlarging a still image recorded on a “Memory Stick” – Memory PB ZOOM	151
Playing back images continuously – Slide show	153
Preventing accidental erasure – Image protection	154
Deleting images – DELETE	155
Writing a print mark – Print mark	158
Changing the image size – Resize	159
Viewing Images with your Computer	160
Viewing images with a computer – Introduction	160
Connecting your camcorder to a computer using the USB cable (For Windows users)	163
Viewing pictures recorded on a tape on a computer – USB Streaming (For Windows users)	173
Viewing images recorded on a “Memory Stick” on a computer (For Windows users)	181
Connecting your camcorder to a computer using the USB cable (For Macintosh users)	184
Viewing images recorded on a “Memory Stick” on a computer (For Macintosh users)	186
Capturing images from an analog video unit on a computer – Signal convert function	187
Copying images to DVD with VAIO	189
Customizing your Camcorder	191
Changing the menu settings	191
Troubleshooting	201
Types of trouble and how to correct trouble	201
Self-diagnosis display	209
Warning indicators	210
Warning messages	211
Additional Information	213
Usable cassettes	213
About the “InfoLITHIUM” battery pack	216
About i.LINK	218
Using your camcorder abroad	220
Maintenance information and precautions	221
Specifications	227
Quick Reference	229
Identifying parts and controls	229

Match case Limit results 1 per page

225

Additional Information

Maintenance information and precautions

Camcorder care

•

Eject the tape, periodically turn on the power, operate the CAMERA and VCR sections

and play back the tape for about 3 minutes if your camcorder is not to be used for a

long time.

•

Clean the lens with a soft brush to remove dust. If there are fingerprints on the lens,

remove them with a soft cloth.

•

Clean your camcorder body with a dry soft cloth, or a soft cloth lightly moistened

with a mild detergent solution. Do not use any type of solvent which may damage the

finish.

•

Do not let sand get into your camcorder. When you use your camcorder on a sandy

beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause

your camcorder to malfunction, and sometimes this malfunction cannot be repaired.

AC Adaptor

•

Unplug the unit from a wall outlet when you are not using the unit for a long time. To

disconnect the power cord, pull it out by the plug. Never pull the power cord itself.

•

Do not operate the unit with a damaged cord or if the unit has been dropped or

damaged.

•

Do not bend the power cord forcibly, or place a heavy object on it. This may damage

the cord and cause fire or electrical shock.

•

Prevent metallic objects from coming into contact with the metal parts of the

connecting section. If this happens, a short may occur and the unit may be damaged.

•

Always keep metal contacts clean.

•

Do not disassemble the unit.

•

Do not apply mechanical shock or drop the unit.

•

While the unit is in use, particularly during charging, keep it away from AM receivers

and video equipment. AM receivers and video equipment disturb AM reception and

video operation.

•

The unit becomes warm during use. This is not a malfunction.

•

Do not place the unit in locations that are:

–

Extremely hot or cold

–

Dusty or dirty

–

Very humid

–

Vibrating

About care and storage of the lens

•

Wipe the surface of the lens clean with a soft cloth in the following instance:

–

When there are fingerprints on the lens surface

–

In hot or humid locations

–

When the lens is used in environments such as the seaside

•

Store the lens in a well-ventilated location subject to little dirt or dust.

To prevent mold from occurring, periodically perform the above.

We recommend turning on and operating your camcorder about once per month to

keep your camcorder in an optimum state for a long time.