Sony STR-DN1040 Operating Instructions (Large File - 14.3 MB) - Page 50

Notes • The receiver is unable to read data in NTFS format. • The receiver is unable to read data other than that saved in the first partition of a hard disk drive. • Operation of models not listed here is not guaranteed. • Operation may not always be ensured even when using these USB devices. • Some of these USB devices may not be available for purchase in certain areas. • When formatting the above models, be sure to format using the model itself or the dedicated formatting software for that model. • When connecting a USB device to the receiver, be sure to connect after the display "Creating Library" or "Creating Database" on the USB device has disappeared. Operating the USB device V/v/B/b, 1 Select "Listen" from the home menu, then press . 2 Select "USB", then press . When the USB device is connected, "USB" appears on the TV screen. You can operate the USB device using the remote control of the receiver. 3 Select the content you want from the content list, then press . The selected content starts playback and the information of music contents appears on the TV screen. To operate the USB device using the remote control USB ./> X x N SHUFFLE REPEAT Press USB before you use the following buttons. Press Operation N Starts play. X Pauses play. x Stops play. ./> Goes to the previous/next file. REPEAT Enters repeat mode. SHUFFLE Enters shuffle mode. Notes on the USB device • Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the receiver off when connecting or removing the USB device. • When USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. Refer to the operating instructions supplied with the USB device to be connected for details on the operation method. 50US