Sony STR-DN1040 Operating Instructions (Large File - 14.3 MB) - Page 90
Reverting back to the factory default settings, Adjusting Settings, Using the Settings menu - factory reset
View all Sony STR-DN1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Reverting back to the factory default settings You can clear all memorized settings and revert the receiver back to the factory default settings by performing the following procedure. This procedure can also be used to initialize the receiver before you use it for the first time. Be sure to use the buttons on the receiver to perform this operation. ?/1 Adjusting Settings Using the Settings menu You can adjust various settings for speakers, surround effects, etc. using the Settings menu. AMP 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. The "CLEARING" appears on the display panel for a while, then changes to "CLEARED!". Changes or adjustments made to the settings are now reset to the defaults. Note It takes about a few minutes for the memory to be cleared completely. Do not turn the receiver off until "CLEARED!" appears on the display. V/v/B/b, RETURN O HOME 1 Press AMP, then press HOME. The home menu is displayed on the TV screen. 90US