Sony STR-DN1040 Operating Instructions (Large File - 14.3 MB) - Page 97
Audio Settings menu, Test Tone, To output test tone from each, speaker, Center Speaker Lift Up
View all Sony STR-DN1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Adjusting Settings • The surround back speakers will be set to the same setting as that of the surround speakers. x Test Tone Lets you select the test tone type on the "Test Tone" screen. Tips • To adjust the level of all speakers at the same time, press 2 +/-. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the TV screen during adjustment. To output test tone from each speaker You can output test tone from the speakers in sequence. 1 Select "Test Tone", then press . 2 Adjust the parameter, then press . • Off • Auto: The test tone is output from each speaker in sequence. • L, C, R, SR, SL, SB*, SBL, SBR, FHL, FHR, SW: You can select which speakers will output the test tone. * "SB" appears when only one surround back speaker is connected. 3 Adjust the speaker level, then press . x Center Speaker Lift Up By using the front high speakers, you can lift up the sounds of the center speaker to an appropriate height on the screen, allowing you to enjoy natural representation without discomfort. • 1 - 10 • Off Note This function does not work in the following cases. - Headphones are connected. - There is no center speaker. - There are no front high speakers. - The "2ch Stereo", "2ch Analog Direct", and "Multi Stereo" sound field are being used. - The sound field for music is being used. x Distance Unit Lets you select the unit of measurement for setting distances. • feet: The distance is displayed in feet. • meter: The distance is displayed in meters. Audio Settings menu You can adjust settings for the audio to suit your preference. x Digital Legato Linear (D.L.L.) The D.L.L. function is Sony proprietary technology that allows low quality digital audio signals and analog audio signals to be played back with high quality sound. • Auto 1: This function is available for lossy compression audio formats and analog audio signals. • Auto 2: This function is available for Linear PCM signals, as well as lossy compression audio formats and analog audio signals. • Off Notes • This function may not work, depending on the content via a USB device, or a home network. • This function works when "2ch Stereo", "A.F.D. Auto", "Multi Stereo" or "Headphone (2ch)" is selected. However, this function does not work in the following cases. - "FM TUNER" or "AM TUNER" input is selected. - Linear PCM signals with a sampling frequency of other than 44.1 kHz are being received. - Dolby Digital Plus, Dolby Digital EX, Dolby TrueHD, DTS 96/24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received. - During network function, signals with a sampling frequency of other than 44.1 kHz is being received. 97US