TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 144

Configuring LAG Figure 2-2 Hash Algorithm Configuration LAG Configuration Hosts Switch A Switch B Server 2.1.2 Configuring Static LAG or LACP For one port, you can choose only one LAG mode: Static LAG or LACP. And make sure both ends of a link use the same LAG mode.  Configuring Static LAG Choose the menu Switching > LAG > Static LAG to load the following page. Figure 2-3 Static LAG Follow these steps to configure the static LAG: 1) In the LAG Config section, select an LAG for configuration. Group Number Select an LAG for static LAG configuration. Description Displays the LAG mode. 2) In the Member Port section, select the member ports for the LAG. It is multi-optional. 3) Click Apply. Note: Clearing all member ports will delete the LAG. Configuration Guide 114