TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 876

Configuring LLDP LLDP Configurations TTL Multiplier: 4 Tx Delay: 2 seconds Initialization Delay: 2 seconds Trap Notification Interval: 5 seconds Fast-packet Count: 3 LLDP-MED Fast Start Repeat Count: 4 Switch(config)#end Switch#copy running-config startup-config 2.2.2 Port Config Select the desired port and set its Admin Status, Notification Mode and the TLVs included in the LLDP packets. Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 configure Enter global configuration mode. interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list ] Enter interface configuration mode. lldp receive (Optional) Set the mode for the port to receive LLDP packets. It is enabled by default. lldp transmit (Optional) Set the mode for the port to send LLDP packets. It is enabled by default. lldp snmp-trap (Optional) Enable the Notification Mode feature on the port. If it is enabled, the local device will send Trap messages to inform the SNMP server when local information changes. It is disabled by default. lldp tlv-select (Optional) Configure the TLVs included in the outgoing LLDP packets. By default, the outgoing LLDP packets include all TLVs. show lldp interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port } Display LLDP configuration of the corresponding port. end Return to Privileged EXEC Mode. copy running-config startup-config Save the settings in the configuration file. Configuration Guide 846