TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 975

Configuring SNMP & RMON RMON Configurations Description Give a description to the event. Type Specify the action type of the event; then the switch will take the specified action to deal with the event. By default, the type is None. None: No action. Log: The switch records the event in the log, and the NMS should initiate requests to get notifications. Notify: The switch initiates notifications to the NMS. Log&Notify: The switch records the event in the log and sends notifications to the NMS. 3) Enter the owner name, and set the status of the entry. Click Apply. Owner Enter the owner name of the entry with 1 to 16 characters. By default, it is monitor. Status Enable or disable the entry. By default, it is disabled. Enable: The entry is enabled. Disable: The entry is disabled. 5.1.4 Configuring Alarm Before you begin, please complete configurations of Statistics entries and Event entries, because the Alarm entries must be associated with Statistics and Event entries. Choose the menu SNMP > RMON > Alarm to load the following page. Figure 5-4 Alarm Config Follow these steps to configure alarm: 1) Select an alarm entry, choose a variable to be monitored, and associate the entry with a statistics entry. Index Displays the index of alarm entries. There are 12 alarm entries all together. Configuration Guide 945