TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 64

Managing System System Info Configurations Step 3 Use the following command to verify the system time information. show system-time Verify the system time information. Step 4 Use the following command to verify the NTP mode configuration information. show system-time ntp Verify the system time information of NTP mode. end Return to privileged EXEC mode. Step 5 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the system time by Get Time from NTP Server and set the time zone as UTC+08:00, set the NTP server as 133.100.9.2, set the backup NTP server as 139.78.100.163 and set the update rate as 11. Switch#configure Switch(config)#system-time ntp UTC+08:00 133.100.9.2 139.78.100.163 11 Switch(config)#show system-time ntp Time zone : UTC+08:00 Prefered NTP server: 133.100.9.2 Backup NTP server: 139.78.100.163 Last successful NTP server: 133.100.9.2 Update Rate: 11 hour(s) Switch(config)#end Switch#copy running-config startup-config 2.2.4 Setting the Daylight Saving Time Follow these steps and choose one method to set the Daylight Saving Time: Step 1 configure Enter global configuration mode. Configuration Guide 34