TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 634

Configuring QoS Configuration Examples 3) Select SP-Mode as the schedule mode and save the settings. Switch(config)#qos queue mode sp Switch(config)#exit Switch#copy running-config startup-config Verify the configuration Verify the port-CoS mapping: Switch(config)#show qos interface Port CoS Value LAG --------- ------------ Gi1/0/1 0 N/A Gi1/0/2 1 N/A ... Verify the schedule mode. Switch(config)#show qos queue mode Scheduler Mode: SP | Weight: Unusable in sp mode 4.2 Example for Configuring WRR Mode 4.2.1 Network Requirements Both RD department and Marketing department can access the local network server. Configure the switches to ensure the traffic from the two departments are forwarded based on the weight value ratio of 2:1 when congestion occurs. The network topology is shown as the following figure. Switch A is an access layer switch, and Switch B is a layer 3 switch with ACL Redirect feature. RD department is connected to port 1/0/1 of Switch A. Marketing Department is connected to port 1/0/2 of Switch A, the server is connected to port 1/0/2 of Switch B and port 1/0/3 of Switch A is connected to port 1/0/1 of Switch B. Configuration Guide 604