TP-Link T2600G-18TSTL-SG3216 T2600G-18TSUN V1 Configuration Guide - Page 61

Managing System System Info Configurations Running Time - 2 day - 4 hour - 55 min - 36 sec 2.2.2 Specifying the Device Description Follow these steps to specify the device description: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 configure Enter global configuration mode. hostname [ hostname ] Specify the system name of the switch. hostname: Enter the system name. The length of the name ranges from 1 to 32 characters. By default, it is the model name of the switch. location [ location ] Specify the system location of the switch. location: Enter the device location. It should consist of no more than 32 characters. By default, it is "SHENZHEN". contact-info [ contact-info ] Specify the system contact Information. contact-info: Enter the contact information. It should consist of no more than 32 characters. By default, it is "www.tp-link.com". show system-info Verify the system information including system Description, Device Name, Device Location, System Contact, Hardware Version, Firmware Version, System Time, Run Time and so on. end Return to privileged EXEC mode. Step 7 copy running-config startup-config Save the settings in the configuration file. The following example shows how to set the device name as Switch_A, set the location as BEIJING and set the contact information as http://www.tp-link.com. Switch#configure Switch(config)#hostname Switch_A Switch(config)#location BEIJING Switch(config)#contact-info http://www.tp-link.com Switch(config)#show system-info System Description - JetStream 48-Port Gigabit Smart Switch with 4 SFP Slots System Name - Switch_A Configuration Guide 31